1, the installation should choose a well-ventilated, low dust, do not wet the site, environmental humidity -10 ℃ -40 ℃. Should be fortified in the outdoor rain, lightning and other facilities. 2, electrical automatic control system, should be waterproof, dustproof, always check the wiring insulation, connecting bolts are loose and the fuse is good and so on. External pressure gauge is best to use a transparent material wrapped to prevent damage. 3, for the convenience of equipment around the installation, maintenance, equipment should be left 70cm space, manholes should be retained 1.5m space, surrounded by floor drains should be located. 4, the device pump unit should be inspected regularly, regular maintenance and add oil. Centrifugal pumps and check valves found leaking, tighten the flange bolts should be timely replacement of asbestos or root, check the pump can not loose foot bolts to prevent damage to the machine. 5. After selecting the venue, properly handle the foundation, with concrete pouring or masonry tank bearing seat. After the base is fully cured, then lifting the tank and put stability, followed by installation accessories, power. 1, the installation should choose a well-ventilated, low dust, do not wet the site, environmental humidity -10 ℃ -40 ℃, should be fortified in the outdoor rain, lightning and other facilities. 2, surrounded by easy installation, maintenance, equipment should stay 70cm space, manholes should be retained 1.5m space, surrounded by floor drains should be located. 3, after the site is selected, properly handle the foundation, with concrete pouring or masonry tank bearing in reference to equipment After the foundation plans) to be the initial setting of the base, in lifting the tank and put stability, followed by installation accessories, power. 4, before the test, you should turn off the water supply valves, check valves of the seal, does not allow leakage phenomenon, After driving, steering pump should be noted that when the pressure gauge pointer to the upper limit, the pump automatically stops, turn the water supply valve to the normal water supply, for regular water supply, you can pull the selector switch to the manual position. 5, the device pump unit should be inspected regularly, regular maintenance and filling oil, centrifugal pumps and check valves found leaking, tighten the flange bolts should be timely replacement of asbestos or root, check the pump foot bolts not loose, prevent damage to the machine. 6, electrical automatic control system, should be waterproof, dustproof, always check the wiring insulation, connecting bolts are loose and the fuse is good and so on. External pressure gauge is best to use a transparent material wrapped to prevent damage. 7. paint off the tank if found, should be promptly painted maintenance to prolong life. 1, saving energy. The traditional pool of secondary pressurized water tap into the pool, so that the original release water pressure is zero, the original pressure of the water wasted energy. Intelligent pump box integration with the adjustment device is connected with the water pipe network can take advantage of the pipe network pressure energy, saving up to 50% -90%. 2, eliminate the secondary pollution of underground pool. The traditional pool of secondary pressurized water tap into the pool, the pool is easily contaminated by dirt and even dead animals, especially in the summer is easy to produce algae or mosquito breeding, a direct impact on health. The integrated use of intelligent box pump adjustment device using a closed water supply, eliminate the secondary pollution. 3, water, reduce accidents. Due to the integration of intelligent box pump fully enclosed structure, to avoid the infiltration, run, run, drip, leak phenomenon; no decontamination tank and saving water. 4, saving investment, reduce the area, installation, use, and easy maintenance. Construction of pools (or tank), the total project investment, and the use of the process should be cleaned regularly, not only increases the total investment in the project, but also increased the cost of routine maintenance. The box no negative pressure water supply equipment utilization adjustment device, saving investment, reduce the area, can be vertical or horizontal mounting of different situations according to the user's site, easy maintenance.